基于GTID的復制
簡介
基于GTID的復制是MySQL 5.6后新增的復制方式.
GTID (global transaction identifier) 即全局事務ID, 保證了在每個在主庫上提交的事務在集群中有一個唯一的ID.
在原來基于日志的復制中, 從庫需要告知主庫要從哪個偏移量進行增量同步, 如果指定錯誤會造成數據的遺漏, 從而造成數據的不一致.
而基于GTID的復制中, 從庫會告知主庫已經執行的事務的GTID的值, 然后主庫會將所有未執行的事務的GTID的列表返回給從庫. 并且可以保證同一個事務只在指定的從庫執行一次.
實戰
1、在主庫上建立復制賬戶并授予權限
基于GTID的復制會自動地將沒有在從庫執行的事務重放, 所以不要在其他從庫上建立相同的賬號. 如果建立了相同的賬戶, 有可能造成復制鏈路的錯誤.
mysql> create user 'repl'@'172.%' identified by '123456';
注意在生產上的密碼必須依照相關規范以達到一定的密碼強度, 并且規定在從庫上的特定網段上才能訪問主庫.
mysql> grant replication slave on *.* to 'repl'@'172.%';
查看用戶
mysql> select user, host from mysql.user;
+-----------+-----------+
| user | host |
+-----------+-----------+
| prontera | % |
| root | % |
| mysql.sys | localhost |
| root | localhost |
+-----------+-----------+
4 rows in set (0.00 sec)
查看授權
mysql> show grants for repl@'172.%';
+--------------------------------------------------+
| Grants for repl@172.% |
+--------------------------------------------------+
| GRANT REPLICATION SLAVE ON *.* TO 'repl'@'172.%' |
+--------------------------------------------------+
1 row in set (0.00 sec)
2、配置主庫服務器
[mysqld]
log_bin = /var/log/mysql/mysql-bin
log_bin_index = /var/log/mysql/mysql-bin.index
binlog_format = row
server_id = 101
gtid_mode = ON
enforce_gtid_consistency = ON
#log_slave_updates = ON
NOTE: 把日志與數據分開是個好習慣, 最好能放到不同的數據分區
enforce_gtid_consistency 強制GTID一致性, 啟用后以下命令無法再使用
create table ... select ...
mysql> create table dept select * from departments;
ERROR 1786 (HY000): Statement violates GTID consistency: CREATE TABLE ... SELECT.
因為實際上是兩個獨立事件, 所以只能將其拆分先建立表, 然后再把數據插入到表中
create temporary table
事務內部不能創建臨時表
mysql> begin;
Query OK, 0 rows affected (0.00 sec)
mysql> create temporary table dept(id int);
ERROR 1787 (HY000): Statement violates GTID consistency: CREATE TEMPORARY TABLE and DROP TEMPORARY TABLE can only be executed outside transactional context. These statements are also not allowed in a function or trigger because functions and triggers are also considered to be multi-statement transactions.
同一事務中更新事務表與非事務表(MyISAM)
mysql> CREATE TABLE `dept_innodb` (id INT(11) UNSIGNED NOT NULL PRIMARY KEY AUTO_INCREMENT);
Query OK, 0 rows affected (0.04 sec)
mysql> CREATE TABLE `dept_myisam` (id INT(11) UNSIGNED NOT NULL PRIMARY KEY AUTO_INCREMENT) ENGINE = `MyISAM`;
Query OK, 0 rows affected (0.03 sec)
mysql> begin;
Query OK, 0 rows affected (0.00 sec)
mysql> insert into dept_innodb(id) value(1);
Query OK, 1 row affected (0.00 sec)
mysql> insert into dept_myisam(id) value(1);
ERROR 1785 (HY000): Statement violates GTID consistency: Updates to non-transactional tables can only be done in either autocommitted statements or single-statement transactions, and never in the same statement as updates to transactional tables.
所以建議選擇Innodb作為默認的數據庫引擎.
log_slave_updates 該選項在MySQL 5.6版本時基于GTID的復制是必須的, 但是其增大了從服務器的IO負載, 而在MySQL 5.7中該選項已經不是必須項
3、配置從庫服務器
master_info_repository 與relay_log_info_repository
在MySQL 5.6.2之前, slave記錄的master信息以及slave應用binlog的信息存放在文件中, 即master.info與relay-log.info. 在5.6.2版本之后, 允許記錄到table中. 對應的表分別為mysql.slave_master_info與mysql.slave_relay_log_info, 且這兩個表均為innodb引擎表.
[mysqld]
log_bin = /var/log/mysql/mysql-bin
log_bin_index = /var/log/mysql/mysql-bin.index
server_id = 102
# slaves
relay_log = /var/log/mysql/relay-bin
relay_log_index = /var/log/mysql/relay-bin.index
relay_log_info_file = /var/log/mysql/relay-bin.info
enforce_gtid_consistency = ON
log_slave_updates = ON
read_only = ON
master_info_repository = TABLE
relay_log_info_repository = TABLE
4、從庫數據初始化 - [optional]
先在主庫上備份數據
復制代碼 代碼如下:
mysqldump --single-transaction --master-data=2 --triggers --routines --all-databases --events -u root -p > backup.sql
—master-data=2 該選項將當前服務器的binlog的位置和文件名追加到輸出文件中(show master status). 如果為1, 將偏移量拼接到CHANGE MASTER 命令. 如果為2, 輸出的偏移量信息將會被注釋。
--all-databases 因為基于GTID的復制會記錄全部的事務, 所以要構建一個完整的dump這個選項是推薦的
常見錯誤
當從庫導入SQL的時候出現
復制代碼 代碼如下:
ERROR 1840 (HY000) at line 24: @@GLOBAL.GTID_PURGED can only be set when @@GLOBAL.GTID_EXECUTED is empty.
此時進入從庫的MySQL Command Line, 使用reset master即可
5、啟動基于GTID的復制
現有master@172.20.0.2和slave@172.20.0.3, 并且已經通過mysqldump將數據同步至從庫slave中. 現在在從服務器slave上配置復制鏈路
mysql> change master to master_host='master', master_user='repl', master_password='123456', master_auto_position=1;
Query OK, 0 rows affected, 2 warnings (0.06 sec)
啟動復制
啟動成功后查看slave的狀態
mysql> show slave status\G
*************************** 1. row ***************************
Slave_IO_State: Queueing master event to the relay log
Master_Host: master
Master_User: repl
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: mysql-bin.000002
Read_Master_Log_Pos: 12793692
Relay_Log_File: relay-bin.000002
Relay_Log_Pos: 1027
Relay_Master_Log_File: mysql-bin.000002
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
Replicate_Do_DB:
Replicate_Ignore_DB:
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 0
Last_Error:
Skip_Counter: 0
Exec_Master_Log_Pos: 814
Relay_Log_Space: 12794106
Until_Condition: None
Until_Log_File:
Until_Log_Pos: 0
Master_SSL_Allowed: No
Master_SSL_CA_File:
Master_SSL_CA_Path:
Master_SSL_Cert:
Master_SSL_Cipher:
Master_SSL_Key:
Seconds_Behind_Master: 5096
Master_SSL_Verify_Server_Cert: No
Last_IO_Errno: 0
Last_IO_Error:
Last_SQL_Errno: 0
Last_SQL_Error:
Replicate_Ignore_Server_Ids:
Master_Server_Id: 101
Master_UUID: a9fd4765-ec70-11e6-b543-0242ac140002
Master_Info_File: mysql.slave_master_info
SQL_Delay: 0
SQL_Remaining_Delay: NULL
Slave_SQL_Running_State: Reading event from the relay log
Master_Retry_Count: 86400
Master_Bind:
Last_IO_Error_Timestamp:
Last_SQL_Error_Timestamp:
Master_SSL_Crl:
Master_SSL_Crlpath:
Retrieved_Gtid_Set: a9fd4765-ec70-11e6-b543-0242ac140002:1-39
Executed_Gtid_Set: a9fd4765-ec70-11e6-b543-0242ac140002:1-4
Auto_Position: 1
Replicate_Rewrite_DB:
Channel_Name:
Master_TLS_Version:
1 row in set (0.00 sec)
當Slave_IO_Running, Slave_SQL_Running為YES,
且Slave_SQL_Running_State 為Slave has read all relay log; waiting for more updates時表示成功構建復制鏈路
6、總結
優點
- 因為不用手工設置日志偏移量, 可以很方便地進行故障轉移
- 如果啟用log_slave_updates那么從庫不會丟失主庫上的任何修改
缺點
- 對執行的SQL有一定限制
- 僅支持MySQL 5.6之后的版本, 而且不建議使用早期5.6版本
以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持腳本之家。
您可能感興趣的文章:- MySQL GTID全面總結
- MYSQL數據庫GTID實現主從復制實現(超級方便)
- MySQL5.6 GTID模式下同步復制報錯不能跳過的解決方法
- Mysql GTID Mha配置方法
- MySQL5.7不停業務將傳統復制變更為GTID復制的實例
- MySQL 5.6 GTID新特性實踐
- MySQL5.6基于GTID的主從復制
- 在MySQL中使用GTIDs復制協議和中斷協議的教程
- MySQL是如何實現主備同步
- 關于mysql主備切換canal出現的問題解決
- 基于mysql+mycat搭建穩定高可用集群負載均衡主備復制讀寫分離操作
- MySQL GTID主備不一致的修復方案
